Warning
You are reading an old version of this documentation. If you want up-to-date information, please have a look at 5.0 .set_parameter <parameter> <value>
Parameters
parameter - refer to Table 27 for a list of valid parameters
value - refer to Table 27 for a list of valid values.
Parameter |
Type 1 |
Valid value |
Default value |
---|---|---|---|
RO |
string |
<none> |
|
RO |
string |
<none> |
|
R/W |
float |
30.0s |
|
R/W |
true/false |
false |
|
RO |
true/false |
false |
|
RO |
int |
0 |
|
R/W |
int |
1 |
- 1
RO: Read Only; R/W: Read and Write
Returns
200 <response>
, returns200
followed by value of the parameter specified if command succeeded, else refer to error codes
Description
Assign a value to the parameter specified as the command argument. Valid parameters are described in Table 28. Refer to section Parameters to have more information about each parameter.
Note
The parameters can only be changed when EYE+ is in production state.
Usage example
start_production 12345
set_parameter timeout 10.5