Warning

You are reading an old version of this documentation. If you want up-to-date information, please have a look at 5.0 .

Effect of each type of lighting

Two types of lighting can be used with EYE+:

• Frontlight

• Backlight

The type of lighting chosen may highlight certain specific areas of the part to be observed or detected. The table below gives the example of a object illuminated from two different angles: backlight or frontlight.

Table 35 Effect of types of lighting on Asycube

	Backlight	Frontlight
Example of object illumination
Areas of the part illuminated (in yellow)
Rendering image