Warning

You are reading an old version of this documentation. If you want up-to-date information, please have a look at 5.1 .

Network Requirements

To be able to fully use your EYE+, make sure your network configuration allows traffic on the following network ports:

Table 37 Network ports specification

Port number

Protocol

Functionality

80

TCP

Access to EYE+ Studio

8088

TCP

Access to EYE+ Studio

8188

TCP

Live video streaming (Camera configuration wizard)

50000-50200

UDP

Live video streaming (Camera configuration wizard)

171

TCP

TCP/IP Command

717

TCP

TCP/IP Command

17171

TCP

TCP/IP Command

Note

If EYE+ shows the following error, please make sure you met requirements specified in table above: Communication between interface and system is partially blocked. Please check firewall or anti-virus settings.