Warning
You are reading an old version of this documentation. If you want up-to-date information, please have a look at 4.2 .Network Requirements
To be able to fully use your EYE+, make sure your network configuration allows traffic on the following network ports:
Port number |
Protocol |
Functionality |
|---|---|---|
80 |
TCP |
Access to EYE+ Studio |
8088 |
TCP |
Access to EYE+ Studio |
8188 |
TCP |
Live video streaming (Camera configuration wizard) |
50000-50200 |
UDP |
Live video streaming (Camera configuration wizard) |
171 |
TCP |
TCP/IP Command |
717 |
TCP |
TCP/IP Command |
17171 |
TCP |
TCP/IP Command |
Note
If EYE+ shows the following error, please make sure you met requirements specified in table above: Communication between interface and system is partially blocked. Please check firewall or anti-virus settings.