警告
You are reading an old version of this documentation. If you want up-to-date information, please have a look at 5.0 .Frontlight
Frontlight connection
Connect your frontlight to the EYE+ Controller Frontlight input with the provided cable.
Frontlight specifications
The frontlight is connected with an M12 5-pin cable. The connector of the frontlight on EYE+ Controller is M12, 5 pin, female (表 20).
Pin |
Waveform |
EYE+ Controller connector |
|---|---|---|
1 |
24V DC Power (3.5 A max) |
|
2 |
0V GND Power |
|
3 |
0V GND Power |
|
4 |
24V DC pulse (1.25A max) |
|
5 |
Not connected |
