Warning
You are reading an old version of this documentation. If you want up-to-date information, please have a look at 5.0 .feeder <command>
Parameters
command - a valid Asycube command.
Returns
200 <response>
, returns200
followed by the response from the Asycube if the command succeeded,, else refer to error codes.
Description
Send a raw Asycube command from EYE+ to the connected Asycube.
Note
Refer to the Asycube Programming Guide to have more information about Asycube raw commands.
Usage example
feeder V?
200 (c) asycube V6.0.0