Warning

You are reading an old version of this documentation. If you want up-to-date information, please have a look at 4.2 .

feeder <command>

Parameters

  • command - a valid Asycube command.

Returns

  • 200 <response>, returns 200 followed by the response from the Asycube if the command succeeded, else refer to error codes.

Description

Send a raw Asycube command from EYE+ to the connected Asycube.

Note

reference Refer to the Asycube Programming Guide to have more information about Asycube raw commands.

Usage example

feeder V?
200 (c) asycube V6.0.0