Warning

You are reading an old version of this documentation. If you want up-to-date information, please have a look at 4.2 .

Frontlight

Frontlight connection

Connect your frontlight to the EYE+ Controller Frontlight input with the provided cable.

Frontlight specifications

The frontlight is connected with an M12 5-pin cable. The connector of the frontlight on EYE+ Controller is M12, 5 pin, female (Table 20).

Table 20 Frontlight connector (EYE+ side)

Pin

Waveform

EYE+ Controller connector

1

24V DC Power (3.5 A max)

FC

2

0V GND Power

3

0V GND Power

4

24V DC pulse (1.25A max)

5

Not connected