警告

You are reading an old version of this documentation. If you want up-to-date information, please have a look at 5.0 .

5. Pick Angle Teaching

../../../_images/pick_angle_teaching_overview.png — 図 82 Pick Angle Teaching overview

Depending on the geometry of your parts, you may need to know the angle of the part for the robot pick up. The purpose of this step is to teach to the system a new reference model (based on the same reference candidate) and to specify the relative orientation of the part with respect to this model.

The reference model is defined by the features detected on the same reference candidate as in the previous step. From the reference features, the orientation of the X and Y axes of the part will define the orientation of the part.

The angle of the part orientation is used to define the RZ angle of the candidates sent by EYE+ when get_part is called.

注釈

This step is optional, it can be skipped if your part does not have a pick angle. To skip this step, click on PART WITH NO DEFINED ANGLE.

../../../_images/no_pick_angle.png — 図 83 A washer has no pick angle (Frontlight: left, Backlight: right)