Warning

You are reading an old version of this documentation. If you want up-to-date information, please have a look at 5.0 .

2. Candidate Detection

../../../_images/candidate_detection_overview.png

Fig. 55 Candidate Detection overview

The purpose of Candidate Detection is to detect candidates (i.e. potential good parts that are “candidates” for the next steps of the wizard) according to their size. The EYE+ detection algorithm filters out elements that are too small or too large in the image. Undesirables include:

  • several parts in contact detected as one

  • platform debris

  • shapes or shadows of the production plate (e.g. production plate with grooves)

Tip

The candidate detection can even filter a part that has a wrong face up if the size of said face is different from that of the desired one.

../../../_images/already_filtered_parts.png

Fig. 56 The orientation of the parts is filtered by their size. Parts that are in the wrong orientation in this case are smaller in area, and are therefore filtered out.

At the end of this step, you should have as many isolated parts as possible surrounded by a green rectangle (called a bounding box) and as few of the wrong size elements detected as possible (dust, background element …).