警告
You are reading an old version of this documentation. If you want up-to-date information, please have a look at 5.1 .Asycube
Access the Asycube configuration through and Asycube.
図 126 Asycube information if connected
Asycube IP settings
This page provide you information about the detected Asycube by EYE+.
IP address |
Subnet mask |
Port |
|---|---|---|
192.168.127.254 |
255.255.255.0 |
4001 |
If your Asycube is correctly configured (表 25), the following information must be displayed:
Asycube type: <your Asycube Type>
Backlight color: <your Asycube backlight color>
Firmware version: <your Asycube current firmware version>
IP address: 192.168.127.254
Port: 4001
Current status: Connected
警告
Current status: Disconnected: First check if the cable is correctly connected between the Asycube and the EYE+ Controller.
If it is correctly connected, your Asycube is probably no longer configured with the default IP address and port. You must change the configuration of the Asycube to match the 表 25. If you need help, please contact us.