Warning
You are reading an old version of this documentation. If you want up-to-date information, please have a look at 5.1 .Robot
Access the robot configuration through and Robot.
Fig. 173 Robot configuration interface
Hand-eye calibration
The hand-eye calibration card informs you about the current state of the Hand-eye calibration wizard and allows you to open it.
Three variants of the interface are possible:
No hand-eye calibration performed (Fig. 174)
Fig. 174 No hand-eye calibration performed
Hand-eye calibration in progress (Fig. 175)
Fig. 175 Hand-eye calibration in progress
Hand-eye calibration already performed (Fig. 176)
Fig. 176 Hand-eye calibration already performed
If the hand-eye calibration was already performed, some information regarding last hand-eye calibration is available:
Last calibration date
Calibration recipe
Part height
Calibration accuracy
Access hand-eye calibration wizard
Click on or to access the Hand-eye calibration wizard.