Warning

You are reading an old version of this documentation. If you want up-to-date information, please have a look at 5.0 .

Hopper

If you have an Asyfill smart hopper, follow the First startup guide in the Asyfill documentation.

Note

You do not need to wire the Asyfill to the Asycube rather directly to the EYE+ Controller using an Ethernet cable.

Note

EYE+ only supports Asyfill with a firmware version greater than or equal to 1.1.0. To update your Asyfill hopper please refer to Asyfill Firmware Update.

If you have a standard hopper, you will find the necessary information in the asycube:hoppers_240_380_530 documentation.

Important

Important information regarding hoppers when using the EYE+ multi-feeding option can be found in Hopper interface.